Close Menu3/8 in. 316 Stainless Steel Ball Valve 1000 WOG Full Port Threaded 2-Piece
SHARPE Spec Sheets: Series 50M76 Ball Valves
150 lb. flanged ends
Full port
316 Stainless steel
body and trim
Locking device
Blow-out proof stem
3/4" Sharpe 316 Stainless Steel Ball Valve - Threaded
This is a three-quarter inch Sharpe brand stainless steel ball valve with threaded connections. This quality Sharpe 50M76 valve features a blowout proof stem and locking device on the handle. Able to handle a wide range of temperatures and pressure. 1000 lbs WOG, 150 WSP. Full port body and ball means less to no flow loss.
1" Sharpe 316 Stainless Steel Ball Valve - Threaded
50M76 Sharpe brand stainless steel ball valve with blow out proof stem. Full port design eliminates the risk of major loss of flow. Easy-turn handle for on/off functionality.
Sharpe SV50M76014 316 Stainless Steel, 2-Piece Ball Valve - 1-1/2" NPT
The Sharpe SV50M76014 is a Series 50M76 316 stainless steel ball valve with a 1-1/2" NPT threaded connection, RTFE seat, 2-piece body type, full port port, locking lever handle, and 1,000 PSI max pressure.
PIG TAIL 15 THERMO-PLASTIC 40315
These hoses are rated up to 350 psig working pressure with a 400 lbs. pull test rating. Each hose comes with 2 ends and fully crimped brass ferrules. Warning: An excess ow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceed the closing ow of the valve or if the excess ow valve installed exceeds the ow capacity of the system. See the Excess Flow Warning page (PG. 18) for more information regarding the use of excess ow devices.
Male hard nose POL (7/8 in. nut) x 1/4 in. male inverted flare
1/4 in. hose I.D.
Tank connection: POL
